Guides:MAME - Software - NeXTSTEP - 3.3
Jump to navigation
Jump to search
Note dump
- Must load device drivers disk first for other peripherals
- When prompted for the cd scsi driver choose ?????
- just wait at boot:
- 1 for english
- 1 to prepare to install
- Select 3.3_Driver_Disk.img, Return
- See CDROM Section
- 1 to continue
- UI starts
CDROM
Attached as a SCSI CDROM
- 1 for 154x SCSI for CDROM ISA
- Select 3.3_Beta_Drivers.img, 8, Return
- Select 6 for IDE Device Driver
^-- does not work .... sadness, gets stuck on Registering EISA
Attached as an IDE CDROM (SCSI dev is ignored)
- 4 for Adapter 2940 (ref: https://hackernoon.com/installing-nextstep-on-vmware-fusion-5c5c3e4442f4)
- When prompted for HDD, Select 3.3_Beta_Drivers.img, 8, Return
- press 7, Return
- Press 2 to select “Primary/Secondary (Dual) EIDE and ATAP Device Controllers”, Return
- This will find both the HDD and CDROM devices
^--- does not work ..... Fails on
sd0: MAME Virtual CDROM 1.0 sd0: Waiting for drive to become ready sd0: Dsk Not Ready .... root on sd0 vfs_mountroot: error=15 panic: (Cpu 0) vfs_mountroot: cannot mount root
References
- http://bitsavers.trailing-edge.com/pdf/next/Installing_and_Configuring_NeXTSTEP_Release_3.3_1994.pdf
- https://hackernoon.com/installing-nextstep-on-vmware-fusion-5c5c3e4442f4
- https://winworldpc.com/product/nextstep/3x
- http://www.kevra.org/TheBestOfNext/ThirdPartyProducts/ThirdPartyHardware/NeXTSTEPonNonNeXTComputers/IntelHardwareForNeXTStep/IntelHardwareForNeXTStep.html
- http://shawcomputing.net/resources/next/software/install/ns_install.html