Difference between revisions of "Guides:MAME - Software - NeXTSTEP - 3.3"

From Wah!ki
Jump to navigation Jump to search
Line 15: Line 15:
  
 
== CDROM ==
 
== CDROM ==
−
in theory it should be possible to install NeXT from a CDROM, but i've been running into issues
+
in theory it should be possible to install NeXT from a CDROM, but i've been running into issues. The manual says a SCSI CDROM is required but I can see if assign the ATAPI drive to sd0 and then wait for it to become ready.
  
  

Revision as of 22:48, 11 March 2021

Note dump

  • Must load device drivers disk first for other peripherals
  • When prompted for the cd scsi driver choose ?????
  1. just wait at boot:
  2. 1 for english
  3. 1 to prepare to install
  4. Select 3.3_Driver_Disk.img, Return
  5. See CDROM Section
  6. 1 to continue
  7. UI starts


CDROM

in theory it should be possible to install NeXT from a CDROM, but i've been running into issues. The manual says a SCSI CDROM is required but I can see if assign the ATAPI drive to sd0 and then wait for it to become ready.


Attached as a SCSI CDROM

  1. 1 for 154x SCSI for CDROM ISA
  2. Select 3.3_Beta_Drivers.img, 8, Return
  3. Select 6 for IDE Device Driver


^-- does not work .... sadness, gets stuck on Registering EISA


Attached as an IDE CDROM (SCSI dev is ignored)

  1. 4 for Adapter 2940 (ref: https://hackernoon.com/installing-nextstep-on-vmware-fusion-5c5c3e4442f4)
  2. When prompted for HDD, Select 3.3_Beta_Drivers.img, 8, Return
  3. press 7, Return
  4. Press 2 to select “Primary/Secondary (Dual) EIDE and ATAP Device Controllers”, Return
  5. This will find both the HDD and CDROM devices

^--- does not work ..... Fails on 

sd0: MAME Virtual CDROM 1.0
sd0: Waiting for drive to become ready
sd0: Dsk Not Ready
....
root on sd0
vfs_mountroot: error=15
panic: (Cpu 0) vfs_mountroot: cannot mount root


References

Retrieved from "https://wahki.mameau.com/index.php?title=Guides:MAME_-_Software_-_NeXTSTEP_-_3.3&oldid=4139"